Joined in 2023 
82 
63 About this deal
We also did power testing on every powered USB hub. To see just how much electricity the ports could deliver, we connected a MakerHawk Electronic Load Tester to the hub and tried to dial up as many amps as we could. As we dial up amps on any device, the voltage drops, so a 5 volt USB port could drop down to 4 volts or less as we increase the load, but USB devices need close to 5 volts – 4.7 or 4.8 volts is usually enough – so we tested how many amps we could get at 4.8 volts and at the, likely unacceptable, rate of 4.05 volts. If you're using an external storage device – perhaps an NVMe drive you've put in one of the best SSD enclosures– you’d benefit a great deal from using a hub that supports 10 Gbps connections – alternatively known as USB 3.1 Gen 2 or USB 3.2 Gen 2. Unfortunately, very few USB hubs actually support these higher speeds and even fewer still support the 10 Gbps speed when it comes from a Type-A, rather than a Type-C, port. Keep in mind that the hub’s power port is for taking power into your laptop, and not outto a phone. But your hub may still be able to charge your phone, with some caveats. A “bus-powered” USB hub connects to your laptop and pulls power from it, which it has share with several devices—and it won’t do it that well. Overall, Anker’s hub is well designed, with adequate spacing between the two 5Gbps USB-A ports. There’s also a 5Gbps USB-C connection for data, plus a second USB-C port for power input at up to 85W rated. (The charger allows up to 100W in, but supplies 85W.) An HDMI port allows for 4K/30Hz video or 1080p/60Hz video to a single external display, standard for the category. Ethernet is excluded, however, so you’ll need to use Wi-Fi instead. Cord length is about 8.5 inches, above the standard 6-inch length. Remove the orange plug from the first signal. This will allow for a signal to be sent out to the other monitor. Take one end of the USB-C cable and connect it to the first monitor and the other end to the second one. Frequently Asked Questions Q1. What happens if you connect 2 USB-C chargers together?
Incredibly Durable】The USB C Splitter constructed with double-braided exterior and aluminum alloy casing to ensure that it doesn’t wear out over time. Can a USB-C hub feel elegant? This one does. Anker’s 7-in-1 USB-C hub feels surprisingly weighty (3.5 ounces), with a premium metallic (aluminum and polycarbonate) sheen. It’s also a bit more expensive than its rivals. Anker’s hub was among the coolest we’ve tested under load, at about 87 degrees. We conducted standardized tests to transfer a file from the SSD to the laptop; from the hard drive to the SSD; and then from an SD card to the PC, while simultaneously transferring files from the hard drive to the SSD. In some cases we used AJA’s System Tool app to run read and write tests on connected drives. In almost all cases, the performance was identical, with a spread of about 3 percent—good news for you, as that’s one less thing to worry about. At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy.
No results found.
Lasuney’s 10-in-1 hub (two USB 3.0 ports, two USB 2.0 ports, two HDMI 1.2 ports (4K@30Hz), DisplayPort gigabit ethernet, microSD/SD, USB-C power input) offers a lot for your money, including an unusual mix of not one, but two HDMI ports, and even a DisplayPort. Thanks to ethernet support, the hub can replace many of your wired connections. Power input is rated at 100W in, with about 87W available to the laptop. When two random USB-C chargers or ports are together, the user is absolutely safe. There is no harm that can come to them by connecting two hosts or sources together. However, when two active power supplies are connected, there is a chance that the situation might become unsafe and problematic. Q2. Is USB 3.0 the same as USB-C? There are no USB-C splitters that split one male USB-C into two USB-C ports. At the current moment, a user’s best bet would be to get a USB-C hub and connect a power supply. The user can then use this to charge multiple devices using one hub. How A USB-C Splitter Differs From A USB Hub https://www.minitool.com/lib/usb-splitter.html#:~:text=or%20USB%20Hub-,An%20Overview%20of%20USB%20Splitter,and%20other%20devices
Power Delivery is a negotiated connection. Both devices communicate with each other to establish their maximum voltage and current capabilities and not every device can take the same voltage. At the start of the connection both sides expect 5V, then they exchange information and synchronise up to a preferred voltage and power level. Anker’s hub was among the fastest we tested to deliver data under load, including simultaneous data transfer between USB-A ports while the SD ports were active. The hub offers an 18-month warranty, and it even ships with a carrying pouch. Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test. Yes, it’s possible to simultaneously use both ends of the USB splitter without any issues, but the transmission speed can decrease compared to when only using one end. How often should I change my USB splitter? Even if all you plugged in were phones then after the first phone then all devices would see an out-of-specification USB voltage which they did not negotiate and may refuse to work at all.Sabrent's HB-U3CR looks like it was built for MacBooks, thanks to a gunmetal gray aluminum chassis and a stylish, slanted design that will prop it up at an insertion-friendly angle on any table. However, it's an equally strong choice for use with a PC laptop that has USB-C ports and needs a few USB Type-A connections. However, there are USB-C hubs that can support less than five USB-C ports. This will mean a user can easily connect up to 4 devices to their computer to perform the tasks they need to accomplish.
Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD.
Product Overview
Image showing the aforementioned USB-C splitter that I desire but where only one port is for charging and the other is for data/audio: Currently, there is no technology that supports USB hubs having 5 or more USB-C ports. It’s missing from the market. The chips required for this are missing, therefore, making it so that users cannot easily access or access this technology at all. PAY ATTENTION TO THE LIMITATION】The C Splitter does NOT for monitors,Only support ONE audio outputs two usb-c port can not work with 2 headphone at the same time(NOT For Power input ),NOT for monitor display，Do NOT work with HDMI cable, Apple Watch. This is a USB-C female to USB-C male adapter designed forpower output or data transfer and it will NOT support video signal transmission.Support 5V/0.9A power output. Output ports: Make sure you get enough ports to attach the number of devices you’re likely to need. Most USB hubs have at least 3, more often 4, output ports, but at your desk, you may need a lot more than that. Also, consider whether you are attaching any USB-C devices (most output ports on hubs are Type-A).
USB hubs are multiple adapters, like USB 2.0 and USB 3.0, that allow different devices to be connected to one computer. It allows the user to interact with multiple USB devices at the same time. A hub can also have ports for wired connection and display preferences. Using USB-C Splitter For Dual Monitors
At worst the battery itself would see a far higher voltage than it was ever designed for or protected against and could rupture and potentially explode. A USB-C port splitter is one that allows different devices to be connected to your computer. This will allow the user to use multiple devices to perform different tasks. This form of a port lets devices like scanners, speakers, and cameras connect to the computer. Two USB-C hubs can easily be connected together. The point to note is that both hubs have their own independent power sources that are separate from the computer used by the user. It is possible to have 127 USB devices connected to your computer system.
Great Deal 
New Comment