Cistern with an integrated sink

Product Information

Bath Taps In the Bath Tap section, we offer a range of convincing Victorian style bath fittings, including Bath Shower Mixers and Bath Fillers, available for fitting to a bath. You will also need to grab cleaning supplies. The specific supplies are up to you, but you will need some anti-bacterial wipes and some cloth at the very least. This is to ensure you keep the work area and the finished piece clean throughout the whole process. To prevent some cleaning, you will also want some pipe caps to fit onto your waste pipe when necessary. If you have a low-pressure toilet, remove the refill tube from the fill valve and connect the faucet tube directly to the fill valve. You will also need a spirit level. This is to ensure no part of the sink or toilet gets installed off kilter or wonky, which could lead to trouble! To secure the faucet firmly on the basin, feed the nut through the faucet tube and screw it on the faucet threads found on the underside of the basin.

All the pipes needed for the toilet and sink enter and leave the room at the same place, saving valuable square metres. Gifts & Books Thomas Crapper has become synonymous with toilets and occasionally toilet humour. In this section you will find a selection of books and publications written about him. So, you’ve done it… Or you’ve paid a professional to do it for you. Either way, your first toilet with a sink built in is installed. Now what? You use it of course! Once you have made use of the toilet, you can flush and wash your hands in one swift motion in one convenient place. Contrary to what some people might think, the grey, soapy water does not make the toilet tank dirty or smelly but rather keeps it clean all the time. What most people also don’t know is that adding a bit of dish soap to your toilet’s overflow tube helps to improve its flushing power, especially in areas with hard water. It is just like when you use an ordinary toilet. By the time you enter the bathroom, the tank is normally full of water. When you flush the toilet after use, the tank refills so that it has enough flushing water for one more use.

Recently Viewed

There are a few people who somehow, for whatever reason, don’t wash their hands after using a toilet. Some people refuse to wash their hands because they don’t want to touch faucets that other people have touched with their dirty hands.

Basin Taps In this section you will find pairs of Victorian style basin taps and wall-mounted basin taps. I have a separate loo and its always been annoying to have to go through 2 other doors into bathroom to wash hands.

While it may not be the most practical way to wash your hands after visiting the bathroom it can be a great space saver and the perfect way to fit in an extra toilet in a small space. As well, it’s a nice way to save water and help out our environment. Next, you will need some bolts or screws… Or both. This all depends on the particular toilet you are installing. Fortunately, we provide online installation instructions for the fitting of all Durovin Bathrooms products. And of course, if you need screws, you will need a screwdriver. If you need bolts, you will need a bolt cutter and a spanner. It’s always useful to buy long bolts that you can cut down to your exact size. A dual-flush cistern is another water saving device that allows you to only half-flush the toilet when needed, for example to flush liquid waste. By only half-flushing the toilet, you are using less water than a full flush ordinarily would, and if you have a little extra water in the cistern from using the basin, this also means the cistern might not need to refill. Long hailed as a water-saving feature, combining dual-flushing with basin-to-cistern water is a great way to reduce daily water consumption. Not only this, but it is ergonomically designed to be extremely comfortable for any user. So, you never have to worry about an unpleasant experience again.

The water is first diverted to the sink spout, so you can wash your hands while the toilet fills. The water flows down the basin and into the waste pipe that fills the toilet. Once the tank reaches the proper level, the valve inside closes and the water shuts off. A toilet sink combo refers to the combination of a toilet and a sink to form one fixture. The sink is mounted on top of the toilet tank instead of the lid. As you wash your hands, the grey water flows from the sink to the tank and is then used to flush the toilet. Sink Positive toilet sink comes with an expansion kit to help it fit in longer toilet tanks. It measures 16.5 inches in width but can be expanded to fit toilets of up to 21.5 inches in width.Once the water supply is turned off, you can flush your preexisting toilet to ensure it drains away any water inside of it. You don’t want to get splashed later! Another selling point of the Aquarius has been its environmentally friendly method of operation. After all, by combining the basin and cistern you aren't just saving space, you're also saving water. The water used from the sink to wash your hands is then re-used to fill up the cistern, saving a huge amount of water that is normally used solely for filling the cistern. Saving space is always important, as it allows you to do more and have more. Maybe you’re a minimalist and value the empty space in an area and the freedom of movement it allows you. If so, a 2 in 1 cistern and sink is exactly what you need for a sleek, chic design that gives you that extra space. So, what are the cons of installing a toilet sink combo? Although this system is simple and practical, it still has shortcomings. The following are the disadvantages of installing a toilet sink combo: 1. Not readily available