Joined in 2023 
82 
63 About this deal
Locate the rubber O-ring and place it on the base so it sits in the ridge provided. Take the clear cover and place it over the base, and secure it with the M3 nuts and bolts. We recommend going across each one rather than around the base; it will ensure a more even fit. Again, be careful not to over-tighten the screws. Snap the outer cover over the clear cover. Take the small rubber grommet and, very carefully, feed the ribbon cable through, threading it through the grommet until it meets the base. Insert in the slot and secure with the metal plate. You now have a waterproof case. 10. Mount your waterproof camera
This robust Naturebytes case will protect your electronics from the elements and is compatible with all Raspberry Pi models! Full kit also available! You can expand on these however you like, adding other functions such as cloud storage upload, video effects, alerts and more! Passively cooling the Raspberry Pi, the performance is similar to Pimoroni’s version. But adding the fans drops the temperatures significantly and the combined cooling this case can keep your Pi cool under load for a full day. The PIR Camera Case makes it easy to create a motion-sensing camera project with your Raspberry Pi 4!
If you are using a Raspberry Pi 4, you may realise that with a more powerful processor, it runs rather hot! We have a range of enclosures that will prevent thermal issues; we recommend the Little Bird Armour Case with Dual Cooling Fan! As of 13/01/21: We have modified the front panel to accommodate the new Raspberry Pi Camera Module 3
Having great megapixels and wide lenses is always great, but not all projects can benefit from those features. Sometimes all you need is a low-cost camera to see better at night or in low-light situations. In this case, the Raspberry Pi Infrared Camera Module is the best option available. This is not an official Raspberry Pi camera, but it was built like it so you can be sure that it is fully compatible with the device. For all these reasons, I was pleased to learn that Naturebytes, the wildlife camera people, are releasing their Wildlife Cam Case as a standalone product for the first time. The camera works with all models of Raspberry Pi 1, 2, 3 and 4. It can be accessed through the MMAL and V4L APIs, and there are numerous third-party libraries built for it, including the Picamera Python library. See the Getting Started with Picamera resource to learn how to use it.Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
Great Deal 
New Comment