WOCA Worktop Oil All You Need for The Maintenance of Kitchen Worktop or Furniture. This Danish Oil for Wood Highlights The Wood’s Natural Glow Fresh Appearance.(Natural) 0,75L

Product Information

The oil is thoroughly hardened after 24 hours at 68ºF. Do not let the treated surface become wet during the hardening process.

Being a penetrating oil is possible to treat small localised areas such as around the sink where more protection against water is required. It is not necessary to oil the full worktop every time. We specialize in environmental and indoor climate friendly woodcare for both outdoors and indoors. Our wide range is created for DIY and professional flooring experts as well as the furniture and flooring industry. The unfinished wood must be sanded, clean and dry before application. Recommended sanding grit range 100-150. On vertically mounted woodwork, apply from top to bottom. La surface devrait être traitée deux ou trois fois avant de l'utiliser. Pour le traitement final poncez l'huile humide avec un papier de verre humide avec un grain de 320-400 avant d'essuyer avec un chiffon en coton sans peluche. The penetrating system gives a natural appearance and highlights the natural grain structure of the wood and enhances the wooden worktops while protecting the wood from withinIt sounds like an interesting project, my concern would be that if it has been used as a science lab table that a wide range of chemicals and substances may have been absorbed into the wood over the years. Test areas will be vital with whatever product you decide to use. Although wood is a great material for kitchen worktops, it does require some care to keep it looking great and functioning well. Wood oils have been used for centuries to protect and preserve wood and although the same is true today, new types and blends of oils are more commonly used. The pros and cons of wooden kitchen worktops?

Osmo Extra Thin 1101 are especially great for denser timbers such as Beech, Bamboo and Walnut worktops. While Sand old and previously treated surfaces with GRIT 180 sandpaper. Vacuum clean the surface thoroughly. Schuur oude en eerder behandelde oppervlakken met schuurpapier korrel 180. Het oppervlak grondig stofzuigen. Lad olien trække ca. 30 min. Ved 20°C. Hvis olien absorberes hurtigt ned i træet, påføres mere olie.

Newsletter from WOCA Denmark

Het oppervlak moet twee of drie maal behandeld worden voor ingebruikname. De laatste laag nat-in-nat inschuren met 320-400, daarna droogwrijven met een pluisvrije katoenen doek. Danish Oils have always been used to protect and preserve work surfaces and other types of timber, and are still commonly used today. So why use a modern worktop oil? Which is best? We hear you ask. The difference between traditional wood oils and the newer ranges of wooden worktop oil products comes down to several key differences. Ease of use – Application and drying times As mentioned before, linseed oil is suitable natural oil that is used as an ingredient for many other related products. Danish Oil is one of them – it is a mixture of polymerized linseed oil, varnish and drying agents, which combine to achieve a hard-wearing and water-resistant finish for wooden worktops. Danish oil is one of the most popular choices when it comes to oiling wooden worktops. Overall, it is an improved version of the Linseed Oil, as it also contains varnish and different drying agents, which help for a more hard-wearing surface and shorter drying times. Reinig het oppervlak grondig met Worktop Oil , 1:20 gemengd. Nadweilen met schoon water. Na het reinigen het oppervlak minimaal 12-24 uur laten drogen If your wooden worktop is marked or lightly scratched a fresh coat of oil will make these micro scratches disappear.

Applying a top oil to a kitchen worktop will enhance the natural colour, grain and character of the timber. If you’re installing a new or renovating an old worktop by sanding, wipe over a small section with a slightly damp (not wet) cloth or sponge to get a good indication of how the worktop will look when oiled. See our full range of Polissez avec le Hand Scrubber Flex Kit White dans le sens du grain du bois. Ceci rendra la surface plus durable. Next, wipe off all excess oil using a lint-free cotton cloth. Do not leave any excess oil on the surface. Its great to hear that the Blog has helped! To get the best result for your worktop, its vital to ensure good and even sanding, finishing on a 150 to 180 grit sandpaper. Once you have the wood well prepared I would definitely recommend a test area first. A product such as the Osmo Top Oil in the Natural 3068. This is designed to maintain that light natural appearance of the wood. Two thin coats will give good protection to a lighter coloured wood and when cleaned with suitable products can last for a number of years before requiring a top up. And that test area will give an indication of how the oil will look on your wood. Prep the wood surface with WOCA Intensive Wood Cleaner Spray. This is not optional. After applying, let the wood dry completely.Wait approx. 30 minutes at 20°C, while the oil soaks into the wood. Apply more oil if dry areas appear. Worktop oils and Hardwax oils are durable, easy to apply, maintain and repair. when the surface starts to look tired or worn, simply clean and apply a thin maintenance coat of oil to the surface to restore its appearance and moisture repellent properties. Our product range is divided into a manageable step by step system focusing on the following: Preparation, Basic treatment and care and maintenance.