Joined in 2023 
82 
63 About this deal
CoolSkin is made from a combination of uPVC and GRP (Glass Reinforced Plastic), which offers maximum protection. NatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024. Not only is our CoolSkin great at protecting materials from all kinds of weather conditions, but it also offers maximum impact resistance. That means there's less chance of the door slab being damaged by bumps. Do not allow excess Polytrol to dry and create a film on the surface (always remove excess product). It is definitely possible to replace a door without replacing the frame, as long as the door frame is in good shape and the new door panel is the exact same size as the previous one. However, there are some symptoms that may point to the necessity for a new door frame.
For the final step, you should use beeswax or another similar product to give your newly painted door a protective layer for the materials and a professional finish. Tip: If your front door has mildew on it, just scrub it with a 50:50 bleach and water solution and leave to stand for about 10 minutes, before rinsing. For more information about Paul and his company please see his bio below. We couldn’t wait to see the photos and share them with our other customers. I’m sure you’ll agree that the transformation is nothing short of marvellous! In the unlikely event that you suffer a problem, either because of a manufacturing fault or general everyday use, we will aim to resolve it promptly.Lightly spraying the screws and central barrel with a lithium-based lubricant every six months should ensure smooth operation. Using a brush or lint-free cloth, apply an even, generous coat of Polytrol. Leave it work for 10-20 mins and then wipe off the excess Polytrol with a new, clean lint-free cloth and leave to dry. Want an updated design, as well as a new colour? Get in touch with our friendly team for a no-obligation free quote and advice. We're always happy to chat windows and doors!
This is obviously very different to traditional timber doors that have a coating of paint over the top as a finishing touch.
If this isn’t done, the door will be resting solely on the latch, which has the potential to result in long-term problems, such as ‘warping or ‘swelling’. Use a brush or a cloth to liberally apply Polytrol. If you notice that some bits are looking shiny and others are looking matt, move any of the surplus oil over to the matt areas. Leave it to work then wipe off the excess Buy your door from EYG and you don’t have to worry about a thing – thanks to our ten-year ‘repair or replace’ warranty promise.
Most exterior doors come with a built-in drainage system, using slots and holes in the bottom of the door’s threshold to ensure excess water runs off and stays outside your home. Anoth customer achieved impressive results on their moped with Polytrol. They just wiped it on with a lint-free cloth, left it to work and then wiped off the excess. The Polytrol brings out the pigment from within the surface and leaves it looking good as new! If the door is only lightly soiled, a simple wash with warm soapy water, a gentle scrub and thorough rinse might be all that is needed. Whether you need a primer, will depend on the type of paint you are going to use. Always follow the instructions.After you have applied Dilunett, your best option is to then finish the doors with a paint, such as Owatrol Deco – our rust inhibiting primer and paint available in 13 colours. When using Polytrol, it’s important to work in areas that you can complete in 10-20 minutes. As most front doors are quite small, you can usually do it all in one go. Polytrol is simple to apply using a cloth or soft brush and is ready to wipe off in just 10 minutes! You will need to keep your door frame free of the grit and grime that can build up over time and will impact the way that the door opens and closes.
Great Deal 
New Comment