This will depend on a number of factors including how well the floorboards were prepped, what paint was used and how much traffic the floor can expect. But a rough estimation is around two years. Application: Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by bush, apply evenly following the grain of the wood. If rollering, use a nap mohair roller. To create a distressed look apply two coats in contrasting colours. Allow to dry then lightly abrade with moistened sand paper or a stainless steel scouring pad - abrade with the grain of the wood. Protect the effect with Rust-Oleum Furniture Finishing Wax. Painting floorboards with a paint pad can be effective. (Image credit: Ronseal) How Long Will a Painted Floor Last? Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.

Coverage: Up to 14m2 / litre. Coverage may vary depending upon method and rate of application and porosity of surface. One simple way to extend the lifespan of your painted floor is to make sure that the floorboards are prepped properly. The more time spent on this part of the process the better the end product will be. Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains orwater courses. Some local authorities have special facilities for the disposal of waste coatings.Now vacuum the floor to get rid of as much dust and debris as possible. The final part of the prep is to clean the floorboards. Use a mop and liquid detergent (as instructed). Then rinse with the mop and clean warm water and leave to dry for at least 24 hours. Use a primer or specialist paint to cover any knots or stains. Drying Time: Touch dry in 1 hour. Handle after 4 hours. Apply a second coat after 4 hours, if necessary. Full hardness after 4 hours. Coverage: Up to 12m²/l per coat. Coverage may vary depending uponmethod and rate of application and porosity of surface. Clean Up: Remove as much product as possible from applicationequipment before washing with water. Do not empty into drains orwater courses. Some local authorities have special facilities for thedisposal of waste coatings. Cover new ground by adding a classic low sheen chalk finish to your flooring for a contemporary refresh.

Finally, adding an extra coat of your chosen paint or a clear matt varnish can give your floorboard paint a longer life. What's the Best Floor Paint? Application: Apply when temperature is between 10 and 30ºC. Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by brush, apply evenly following the grain of the wood. If rollering, use a short nap mohair roller. Two coats are recommended. Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days.We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items Stain Removal: Remove any stains promptly, most common stainse.g. dirt, ketchup, mustard, tea, coffee can be removed using a softcloth and warm soapy water. Do not use scourers or abrasive cleanersas these may mark the paint finish. While a small hand sander or orbital sander can be useful for preparation, if you have a large space with previously painted or stained floorboards, you'll likely need to hire a drum sander for sanding floorboards properly.

The Rust-Oleum Chalky Finish Floor Paint is water-based with virtually no odour and give an extremely durable smooth matt finish. Coverage: Up to 12 - 14m2 / litre. Coverage may vary depending upon method and rate of application and porosity of surface. Preparation: For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting.Limitations: For interior use only. Temperature at time of theapplication and during drying should be greater than 5°C. To ensurepaint suitability for your particular project test on a small inconspicuousarea first. A luxurious durable matt finish for interior walls and ceilings.Class 1 scrub rated for easy cleaning. Scuff and stain resistant. Preparation: For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood, previously painted or varnished surfaces should be sanded before painting. Ensure new concrete is sound, fully cured and free from laitance. Application: Stir thoroughly prior to use. The product may be appliedby brush or medium pile roller.