As far as possible that means recommending equipment that we have actually reviewed, but we also include products that are popular, highly-regarded benchmarks in their categories. Proudly proclaiming support from Dragon’s Den, Stafford’s Tru-Tension has created something brilliant with the Tyre Monkey. At 10cm, the slightly curved handle sits comfortably in either hand and provides reasonable leverage. With plenty of leverage and tough nylon construction, Lezyne's Power Lever XL tyre levers are well worth adding to your toolbox if you have a tight tyre and rim combination. They're about 3cm longer than regular tyre levers and that adds up to a lot of extra oomph for persuading reluctant tyres off rims. You can get longer metal levers, but the size and weight makes them workshop items. At just 57g, the Power Lever XLs are light enough to carry around.

Pedros Tyre Levers (Pair) | Wiggle

Hmm having seen the video if you tried this with Marathon Plus tyres the bead would pop off behind you as you slid it round - looks like it still needs a tyre lever to stop this.

Kil0ran agreed: 'They're only let down by poor instructions which lead to people using them wrong. Originally designed to help fit Marathons they work brilliantly for tight tubeless tyres. Only lever which enabled me to get some GP5000 tubeless tyres on my rims.' Value These tyre levers get badged up by a number of brands, but they are the same model. They're pretty much what you might think of as ‘normal’ tyre levers , although there are others with a similar looking profile that do have slightly different ergonomics and shapings which aren't as effective. Some of the best tyre levers incorporate metal into their design to ensure they’re strong enough to cope with extreme forces.

Best tyre levers in 2023 | Seat and remove your tyres with Best tyre levers in 2023 | Seat and remove your tyres with

Getting tyres on is all very well, but tyre levers need to get them off, too, and in this department the Schwalbes also excel. The hook tapers to a fine point on the end of a tight-radius curve that easily slips under even my silly-tight test set. You still need a bit of finesse to get the levers in exactly the right places, but they lifted the bead off with aplomb.Made of 'high strength matrix polymer and engineering grade reinforced plastic', Topeak Shuttle Levers feel stiff in the hand and up for a proper wrestle with a recalcitrant tyre bead. The tips of both levers are finely pointed, with a nice curvature perfect for getting between a tight-fitting bead and rim. I don't have hookless rims so can't verify this but I suspect you're right. Will still work very well as a conventional leaver but the clip will have nothing to clip onto off the rim doesn't have a hook. With the Schwalbe levers holding the tyre in place, I was able to push the last section of bead over the rim by hand – no lever required. It was still a time-consuming job and I still wouldn't risk this tyre/rim combo in the field, but that I could do it at all validates the usefulness of Schwalbe's little hook.

tyre levers for cycling 2023 — make light work of Best tyre levers for cycling 2023 — make light work of

You can now take a second lever, place it under the lifted bead to the side of the first lever and work it a few inches along, before repeating the cantilever procedure. With both levers lifting the bead, you should be able to grasp the lifted section of the deflated tyre carcass between the levers with a firm jolting motion, and roll it off with your hands.

Topeak Ratchet N Roll Elite

These substitutes carry a risk. The sharp edges have a tendency to damage inner tubes or rim tape if you ride a tubeless setup. Well, that one time you get a flat and you have to fix it in the middle of nowhere and you don't have a tyre lever to hand, you're going to look pretty silly if you can't do it when it's wet and cold and your fingers are going numb. Tyre levers weigh practically nothing, and rather than being the thing you have to rely on to fit your tyres, it's something you should have to hand to get that last few inches of tyre bead on easily. The Shuttle Lever 1.2 offers good levels of versatility and great ergonomics. David Caudery / Our Media The angled tip can cut into the bead slightly, making sliding the lever around the rim more difficult. The tyre lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two?